Publications

All publications covering the EU-funding period (2003-2006) of the ADEMAT Network are presented below:

2006

  1. F. Lasagni, A. Lasagni, C. Holzapfel, F. Mücklich, H.P. Degischer: Three Dimensional Study of Si-eutectic Structures in Unreinforced and hort Fibre Reinforced Al-Alloys, 12. Internationale Metallographie-Tagung, Leoben, Austria, 2006. 177-183.

  2. F. Warchomicka, M. Stockinger, H.P. Degischer: Effect of the hot deformation on the microstructure of Ti-10V-2Fe-3Al, 12. Internationale Metallographie-Tagung, Leoben, Austria, 2006, 226-230  

  3. F. Lasagni, H.R. Mohammadian, A. Falahati, H.P. Degischer: Volume change of Si-containing Al-alloys during ageing, 15th Congress IFHTSE (International Federation for Heat Treatment and Surface Engineering and Surface Modification Technologies) SMT20 Conference, Vienna, Austria, 2006. 

  4. F. Lasagni, A. Lasagni, C. Holzapfel, F. Mücklich, H.P. Degischer: Three Dimensional Characterization of unmodified and Sr-modified Al-Si eutectics by FIB and FIB EDX Tomography, Advanced Engineering Materials, 2006, 719-723. 

  5. F. Lasagni, A. Lasagni, C. Holzapfel, F. Mücklich, H.P. Degischer: Análisis 3D del Si Eutéctico en Aleaciones Aluminio-Silicio y Materiales Compuestos, IX Congreso Nacional de Materiales SEMAT, Vigo, Spain, 2006, 555-558.

  6. F. Warchomicka, M. Stockinger, H.P. Degischer: Quantitative analysis of the microstructure of near beta titanium alloys during compression tests, Journal of Materials Processing Technology 177, 2006, 473-477

  7. F. Lasagni, H.P. Degischer, M. Papakyriacou: Influence of solution treatment, Sr-modification and short fibre reinforcement on the eutectic morphology of Al-Si alloys, Journal of Practical Metallography 43, 2006, 6, 271-285. 

  8. F. Lasagni, H.P. Degischer: FIB-EDX-Tomography – 3D Characterization of Al-Si eutectics, Junior Scientist Conference 2006, Vienna University of Technology, 2006, 149-150.

  9. F. Lasagni, H.R. Mohammadian Semmani, A. Falahati, H.P. Degischer, P. Schulz, M. Papakyriacou, B. Mingler: Si precipitation Kinetics in AlSi(Mg) Alloys, Aluminium 2006 Conference, Essen, Germany, 2006.

  10. M. Duarte, J.M. Molina, R. Prieto, E. Louis, J. Narciso: Effects on Particle Size and Volume Fraction on Wear Behaviour of Aluminium/Ceramic Particles Composites, Solidification Processing of Metal Matrx Composites, Rohatgi honorary symposium, San Antonio, USA, 2006.

  11. M.B. Parodi, R. Prieto, J. Narciso, E. Louis: Synthesis of mesophase pitch-derived carbon foams prepared by replication process, CARBON Conference, Scotland, 2006.

  12. R. Prieto, J. Narciso, M. Bahraini, J.M. Molina, L. Weber, E. Louis: Graphite foam infiltrated with metallic alloys, CARBON Conference, Scotland, 2006.

  13. R. Prieto, J. Narciso, E. Louis: Graphite/Metal composites for heat sink applications, CARBON Conference, Scotland, 2006.

  14. N.V. Dudamell, R. Prieto, M. Duarte, J. Narciso, E. Louis, M.H. Staia: Efecto de la fracción de volumen y del tratamiento térmico de la matriz en el comportamiento frente al desgaste de un material compuesto Al-Cu 4%/Al2O3p, XII Congreso Nacional de Materiales, Vigo, Spain, 2006.

  15. M. Duarte, J.M. Molina, R. Prieto, E. Louis, J. Narciso: Selfsimilar fluctuations in dry friction dynamics, Metallurgical & Materials Transactions A, 2006, accepted for publication

  16. H. Pinto, L. Ito, M. Crovace, E.B. Ferreira, F. Fauth, T. Wroblewski, E.D. Zanotto, A.R. Pyzalla: Surface and Bulk Residual Stresses in Li2O.2SiO2 Glass-Ceramics, Journal of Non-Crystalline Solids, 2006, submitted.

  17. A. Lasagni, D.F. Acevedo, C.A. Barbero, F. Mücklich, One-step production of organized surface architectures on polymeric materials by direct laser interference structuring, Advanced Engineering Materials, 2006, accepted for publication.

  18. D.A. Acevedo, A.F. Lasagni, C.A. Barbero, F. Mücklich, Simple Fabrication Method of Conductive Polymeric Arrays by Direct Laser Interference micro/nano Patterning, Advanced Materials, 2006, submitted

  19. D. Acevedo, A. Lasagni, C. Barbero, F. Mücklich, Estructuración directa de superficies poliméricas utilizando interferencia laser pulsada, Congreso Argentino de Química, 2006, accepted.

  20. C.F. Barbatti, F. Sket, J. Garcia, A. Pyzalla: Influence of binder metal and surface treatment on the corrosion resistance of (W,Ti)C-based hardmetals, Journal of Surface & Coatings Technology, 2006, in Press.

  21. C. Barbatti, F. Sket, D. Eyidi, J. Garcia, A. Pyzalla: SEM and TEM Investigations of (W,Ti)C-(Co,Ni,Fe) Graded Hardmetals, 12. Internationale Metallographie-Tagung, Leoben, Austria, 2006, accepted.

 

 

2005

  1. H.P. Degischer, F. Lasagni, C. Poletti, T. Huber: Microstructural Instabilities Revealed by Dilatometry, Proceedings of the International Light Metals and Technology Conference 2005, St. Wolfgang, AUSTRIA, 2005, pp. 27-32.

  2. F. Lasagni, G. Requena, H.P. Degischer, M. Papakyriacou: Influence of Al2O3 short fibres on the hardness of heat treated cast Al-alloys, Proceedings of the 15. Symposiums Verbundwerkstoffe und Werkstoffverbunde, Kassel, Germany, 2005, pp. 57-62.

  3. F. Lasagni, G. Requena, H.P. Degischer, B. Mingler, M. Papakyriacou: Entmischung und Einformung des Si in Al-Si-Legierungen, Proceedings of the 38. Metallographie Tagung, Bochum, Germany, 2005, pp. 443-448.

  4. F. Lasagni, H.P. Degischer, M. Papakyriacou: Morphological Changes of Si in Al-Si alloys and Short Fibre Composites, Submitted to Journal of Metallic Materials, 2005.

  5. F. Lasagni, H.P. Degischer, M. Papakyriacou: Influence of Si Precipitation and Spheroidization on the Thermal Expansion and Hardness of AlSi-Alloys and Composite Material, Submitted to Jornadas SAM/CONAMET 2005 – MEMAT 2005, Mar del Plata, Argentine, 2005.  

  6. M.A. Guitar: Endurecimiento de Acer Inoxidable AISI 316L Mediante Carburización Asistida por Plasma, Jornadas SAM/CONAMET 2005 – MEMAT 2005, Mar del Plata, Argentine, 2005.

  7. M.A. Guitar, D. Münter, H.J. Spies: Endurecimiento de Acer Inoxidable AISI 316L Mediante Nitrocarburización Asistida por Plasma, Jornadas SAM/CONAMET 2005 – MEMAT 2005, Mar del Plata, Argentine, 2005.

  8. M. Duarte, J. M. Molina, R. Prieto, E. Louis, J. Narciso: Selfsimilar fluctuations in dry friction dynamic, XIII Congreso de Física Estadística, madrid, Spain, 2005.

  9. F. Soldera, N. Jeanvoine, A. Faundez, F. Mücklich: Study of Plasma Erosion on Surfaces and Microstructures, Proceeding of the 16th International Plansee Seminar 2005, Reutte , Austria, 2005

  10. P. Fiorito, C. Brett, S. Cordoba de Torresi: Hybrid copper hexacyanoferrate/polypyrrole composite for oxidase-based biosensors, Proceedings of the Joint Meeting Bioelectrochemestry 2005, Coimbra, Portugal, 2005.

  11. P. Fiorito, C. Brett, S. Cordoba de Torresi: Polypyrrole/copper hexacyanoferrate hybrid as redox mediator for oxidase-based biosensors (Submitted), Analytica Chimica Acta, Elsevier, 2005.

  12. A. Fischer, H.-J. Spies, H. Biermann, M. Staia: Nitrided Iron Aluminude – A new Material for Hot Working Tools, Proceedings of the1st International Conference on Heat Treatment and Surface Engineering of Tools and Dies, Croatia, 2005.

  13. J. Fiscina, M. Cáceres, F. Mücklich: On the spectrum behaviour of vibrated granular matter, Journal of Physics Condens. Mater., 2005.

  14. J. Fiscina, M. Cáceres: Fermi-like behaviour of weakly vibrated granular matter, Journal of Cond-matt./0501363. Submitted to the Phys.Rev.Lett. January 13th, 2005.

  15. A. Lasagni, F. Soldera, A. Faundez and F. Mücklich: Material dependent Plasma-Erosion Regimes of Metals exposed to electrical discharges, submitted to Advanced Engineering Materials, 2005.

  16. G.Burdiles, F.Soldera, H. Seidel, U.Schmid, J.Vivas Hohl, F. Mücklich: Study of Electro Discharge Erosion on Crystalline Silicon, Submitted to Jornadas SAM/CONAMET 2005 – MEMAT 2005, Mar del Plata, Argentine, 2005.

  17. J. Arias-Pardilla, H.J. Salavagione, C. Barbero, E. Morallón, J.L. Vázquez: Study of the Chemical Copolymerization of 2-Aminoterephtalic Acid and Aniline Synthesis and Copolymer Properties, Submitted to Journal of Polymer Science Part A, Wiley, 2005.

 

2004

  1. F. Lasagni, H.P. Degischer, M. Papakyriacou: Influence of Si Spheroidization on Thermal Expansion in Al-Si-Alloys, Week of Doctoral Studies, 13th Annual Conference of Doctoral Students, Prague, Czech Republic, 2004.

  2. F. Lasagni, H.P. Degischer, M. Papakyriacou: Precipitation and Spheroidization of Si in Al-Si-Alloys affect Thermal Expansion, Junior EUROMAT 2004, Lausanne, Switzerland, 2004.

  3. S. P. Brühl, R. Charadia, N. Mingolo, J. Cimetta, M. A. Guitar, S. Suárez, M. Duarte: Nitruración de un Acero Inoxidable AISI 410 Partiendo de Diferentes Tratamientos Térmicos, Proceedings of Jornadas SAM/CONAMET 2004, La serena, Chile, 2004, pp. 917-922.

  4. A. Fischer, H.-J. Spies, H. Biermann, M. Staia: Tribological response of  ODS Fe-Al nitrided Alloys, Simposium de Ingenieria de Superficie JIFI 2004, Caracas, Venezuela, 2004.

  5. L. Agudo, A. Pyzalla, J.L. Garcia, M.H.Staia: Caracterización Microestructural y Perfiles de Dureza de Carburos Cementados con Características Continuas y Funcionales, Simposium de Ingenieria de Superficie JIFI 2004, Caracas, Venezuela, 2004.

 

2003

  1. F. Lasagni, G.C. Requena, J.L. Garcia, J.A. Vivas Hohl, H.P. Degischer: In Situ Measurement of Local Deformation in Discontinuously Reinforced Aluminium Matrix Composites, JORNADAS SAM, CONAMET and SIMPOSIO MATERIA 2003, Bariloche, Argentina, 2003.

  2. G.C. Requena, F. Lasagni, H.P. Degischer: Lokale Verformung in diskontinuierlich verstärktem Aluminium, 14. Symposium: Verbundwerkstoffe und Werkstoffverbunde, Vienna, Austria, 2003.

 

For any questions contact us!

 


 

Who we are?What’s ADEMAT?Training ProgrammesScholarship OfferHow to get a Scholarship?Grant-Holder ActivitiesLogin MembersNetwork ActivitiesPublicationsNewsLinks

Contacts: ARG - AUT - BRA - CHI - GER - POR - ESP - U.K. - VEN